RAVENOL Turbinenöl T 32 is produced for the lubrication of gas and steam turbines as well as turbo compressors with and without transmission according to the specifications of DIN 51 515-2.
RAVENOL Turbinenöl T 32 is based on high quality mineral base oils with agents to increase the corrosion protection and aging resistance.
Application Notes
RAVENOL Turbinenöl T 32 is used in fixed gas and steam turbines as well as in electrical machines or machines driven by steam turbines like generators, compressors, pumps and transmissions.
RAVENOL Turbinenöl T 32 can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings in case of problems of the contamination with water because a high proctection against rust and oxidation is requested.
Quality Classifications
RAVENOL Turbinenöl T 32 is tried and tested for aggregates specifying:
Specifications
BS 489: 1999, DIN 51515 (L-TD), Siemens TLV 9013 04, General Electric GEK 46506D, Alsthom HTGD 90117
Characteristic
RAVENOL Turbinenöl T 32 offers:
- an excellent thermic and oxidative stability
- an excellent viscosity temperature behaviour
- a high and stable viscosity index
- a very good oxidation stability also at very high temperatures
- a good protection against corrosion of Ferro and non Ferro metals
- an excellent water separation behaviour
- a very good air separation behaviour which excludes foam formation as far as possible
- a low pour point
- a good corrosion behaviour
- an excellent water separation behaviour / demulsifying behaviour
RAVENOL Turbinenöl T 32 is produced for the lubrication of gas and steam turbines as well as turbo compressors with and without transmission according to the specifications of DIN 51 515-2.
RAVENOL Turbinenöl T 32 is based on high quality mineral base oils with agents to increase the corrosion protection and aging resistance.
Application Notes
RAVENOL Turbinenöl T 32 is used in fixed gas and steam turbines as well as in electrical machines or machines driven by steam turbines like generators, compressors, pumps and transmissions.
RAVENOL Turbinenöl T 32 can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings in case of problems of the contamination with water because a high proctection against rust and oxidation is requested.
Quality Classifications
RAVENOL Turbinenöl T 32 is tried and tested for aggregates specifying:
Specifications
BS 489: 1999, DIN 51515 (L-TD), Siemens TLV 9013 04, General Electric GEK 46506D, Alsthom HTGD 90117
Characteristic
RAVENOL Turbinenöl T 32 offers:
- an excellent thermic and oxidative stability
- an excellent viscosity temperature behaviour
- a high and stable viscosity index
- a very good oxidation stability also at very high temperatures
- a good protection against corrosion of Ferro and non Ferro metals
- an excellent water separation behaviour
- a very good air separation behaviour which excludes foam formation as far as possible
- a low pour point
- a good corrosion behaviour
- an excellent water separation behaviour / demulsifying behaviour
| Characteristics | Unit | Data | Audit |
|---|
| Colour | | gelb | visual |
| Density at 20°C | kg/m³ | 873 | EN ISO 12185 |
| Viscosity at 40°C | mm²/s | 32 | DIN 51 562 |
| Viscosity at 100°C | mm²/s | 5,4 | DIN 51 562 |
| Viscosity index VI | | 98 | DIN ISO 2909 |
| Flash point (COC) | °C | 204 | DIN ISO 2592 |
| Pourpoint | °C | -30 | DIN ISO 3016 |
| Acid number | mg KOH/g | 0,15 | DIN EN 12634 |
All indicated data are approximate values and are subject to the commercial fluctuations.
